Filter
Top Products
SSL VPN
936
SonicOS 5.8.1 Administrator Guide
Configuring SSL VPN Access for RADIUS Users
To configure RADIUS users for SSL VPN access, you must add the users to the SSLVPN
Services user group. To do so, perform the following steps:
Step 1 Navigate to the Users > Settings page.
Step 2 In the Authentication Method for login pulldown menu, select RADIUS or RADIUS + Local
Users.
Step 3 Click the Configure button for Authentication Method for login. The RADIUS Configuration
window displays.
Step 4 Click on the RADIUS Users tab.
Step 5 In the Default user group to which all RADIUS users belong pulldown menu, select SSLVPN
Services.
Note The VPN Access tab in the Edit User window is also another granular control on access for
both Virtual Office Bookmarks and for NetExtender access.
Step 6 Click OK.
Configuring SSL VPN Access for LDAP Users
To configure LDAP users for SSL VPN access, you must add the LDAP user groups to the
SSLVPN Services user group. To do so, perform the following steps:
Step 1 Navigate to the Users > Settings page.
Step 2 Set the Authentication method for login to either LDAP or LDAP + Local Users.
Step 3 Click the Configure button to launch the LDAP Configuration window.
Step 4 Click on the LDAP Users tab.
Step 5 In the Default LDAP User Group pulldown menu, select SSLVPN Services.
Note The VPN Access tab n the Edit User window is also another granular control on access for
both Virtual Office Bookmarks and for NetExtender access.
Step 6 Click OK.