Filter
Top Products
Modem
460
SonicOS 5.8.1 Administrator Guide
Configuring a Profile
1. In the Modem > Connection Profiles page, click the Add button. The Modem Profile
Configuration window is displayed for configuring a dialup profile.
Once you create your profiles, you can then con
figure specify which profiles to use for WAN
failover or Internet access.
To configure your ISP settings, you must obtain your Internet information from your dial-up
Internet Service Provider.
1. In the General Settings page, enter a name for your dialup profile in the Profile Name
field.
2. Enter the primary number used to dial your ISP in the Primary Dialed Number field.
Tip! If a specific prefix is used to access an outside line, such as 9, &, or, , enter the number as part of the primary
phone number.
3. Enter the secondary number used to dial your ISP in the Secondary Dialed Number field
(optional).
4. Enter your dial-up ISP user name in the User Name field.
5. Enter the password provided by your dialup ISP in the User Password field.
6. Confirm your dialup ISP password in the Confirm User Password field.
7. If your ISP has given you a script that runs when you access your ISP connection, cut and
paste the script text in the Chat Script field. See the Information in “Chat Scripts” on
page 463 section for more information on using chat scripts.