Filter
Top Products
Configuring WAN Acceleration
1324
SonicOS 5.8.1 Administrator Guide
Example 2
To configure acceleration of only the HTTP web traffic. Follow the steps below:
Step 1 Navigate to WAN Acceleration > TCP Acceleration.
Step 2 Select the Configuration tab.
Figure 49 Configuring TCP Acceleration Example 2
Step 3
Click the Enable TCP Acceleration checkbox.
Step 4 In the TCP Acceleration Mode drop-down, select Only TCP Services Specified in TCP
Acceleration Service Object.
Step 5 In the TCP Acceleration Service Object drop-down, select HTTP.
Step 6 In the Address Object always excluded from TCP Acceleration, select None.
Step 7 Click the Apply Changes button.