Filter
Top Products
1425
SonicOS 5.8.1 Administrator Guide
CHAPTER 91
Chapter 91: Using the Application Firewall Wizard
Wizards > Application Firewall Wizard
The Application Firewall wizard provides safe configuration for many common use cases, but
not for everything. If at any time during the wizard you are unable to find the options that you
need, you can click Cancel and proceed using manual configuration. See “Application Control”
on page 617 for more information on manual configuration. To use the wizard to configure
application firewall, perform the following steps:
Step 1 Login to the SonicWALL security appliance.
Step 2 In the SonicWALL banner at the top of the screen, click the Wizards icon. The wizards
Welcome screen displays.
Step 3 Select the Application Firewall Wizard radio button and then click Next.
Step 4 In the Application Firewall Wizard Introduction screen, click Next.
Step 5 In the Application Firewall Policy Type screen, click a selection for the policy type, and then
click Next.
You can choose among SMTP, incoming POP3, Web Access, or
FTP file transfer. The policy
that you create will only apply to the type of traffic that you select. The next screen will vary
depending on your choice here.
Step 6 In the Select <your choice> Rules for Application Firewall Policy screen, select a policy rule
from the choices supplied, and then click Next.
Depending on your choice in the pr
evious step, this screen is one of four possible screens:
• Select SMTP Rules for Application Firewall Policy
• Select POP3 Rules for Application Firewall Policy
• Select Web Access Rules for Application Firewall Policy
• Select FTP Rules for Application Firewall Policy