Filter
Top Products
SonicPoint > Virtual Access Point
579
SonicOS 5.8.1 Administrator Guide
Associating a VAP Group with your SonicPoint
If you did not create a SonicPoint Provisioning Profile, you can provision your SonicPoint(s)
manually. You may want to use this method if you have only one SonicPoint to provision. This
section is not necessary if you have created and provisioned your SonicPoints using a
SonicPoint Profile.
Step 1 In the left-hand menu, navigate to the SonicPoint > SonicPoints page.
Step 2 Click the Configure button next to the SonicPoint you wish to associate your Virtual APs with.
Step 3 In the Virtual Access Point Settings section, select the VAP group you created in Grouping
Multiple VAPs, page 577 from the 802.1
1g (or 802.11a) Radio Virtual AP Group drop-down
list. In this case, we choose VA
P as our Virtual AP Group.
Step 4 Click the OK button to associate this VAP Group with your SonicPoint.
Step 5 Click the Synchronize SonicPoints button at the top of the screen to apply your provisioning
profile to available SonicPoints.
Your SonicPoint may take a moment to reboot before changes take place. After this process is
complete, all of your VAP profiles will be available to wireless users through this SonicPoint.
Note If you are setting up guest services for the first time, be sure to make necessary
configurations in the Users > Guest Services pages. For more information on configuring
guest services, refer to the SonicOS Enhanced Administrator’s Guide.