Appendix A: CLI Guide
1454
SonicOS Enhanced 5.6 Administrator’s Guide
SONICPOINT SUB-COMMANDS
<sonicpoint><string> Configures a SonicPoint profile
sync Synchronizes configured SonicPoints
country-code <US|CA> Sets applicable country code for a
SonicPoint
[no] delete Deletes an operational SonicPoint from
a deployment
[no] enable Enables or disables a configured
SonicPoint
end Exits configuration mode
exit Exits menu and applies changes
finished Exits to top-level and applies changes
where needed
info Displays information on a specific
SonicPoint
[no] radio-a enable Enables or disables 802.11a radio
band wireless connections
radio-a acl allow
<string>
Adds a specific MAC address to the
Access Control List (ACL) to allow
802.11a radio band wireless
connections to a SonicPoint
radio-a acl deny <string> Adds a specific MAC address to the
denied Access Control List, preventing
802.11a radio band wireless
connections to a SonicPoint
[no] radio-acl enable Enables or disables the Access Control
List feature on 802.11a radio
radio-a acl mode
<deny|allow|
disabled|enabled>
Sets Access Control List enforcement
radio-a acl object-handle
<string>
Sets 802.11a radio ACL to allow list
object handle
radio-a antenna-diversity
<one|two|both>
Sets which antenna (left, right, or both)
the SonicPoint uses to send and
receive data
Command Description