Filter
Top Products
VPN > Settings
888
SonicOS 5.8.1 Administrator Guide
–
Allow Connections to - Client network traffic matching destination networks of each
gateway is sent through the VPN tunnel of that specific gateway.
• This Gateway Only - Allows a single connection to be enabled at a time. Traffic
that matches the destination networks as specified in the policy of the gateway is
sent through the VPN tunnel. If this option is selected along with Set Default Route
as this Gateway, then the Internet traffic is also sent through the VPN tunnel. If this
option is selected without selecting Set Default Route as this Gateway, then the
Internet traffic is blocked.
• All Secured Gateways - Allows one or more connections to be enabled at the
same time. Traffic matching the destination networks of each gateway is sent
through the VPN tunnel of that specific gateway. If this option is selected along with
Set Default Route as this Gateway, then Internet traffic is also sent through the
VPN tunnel. If this option is selected without Set Default Route as this Gateway,
then the Internet traffic is blocked. Only one of the multiple gateways can have Set
Default Route as this Gateway enabled.
• Split Tunnels - Allows the VPN user to have both local Internet connectivity and
VPN connectivity.
–
Set Default Route as this Gateway - Enable this check box if all remote VPN
connections access the Internet through this SA. You can only configure one SA to use
this setting.
–
Use Default Key for Simple Client Provisioning - Uses Aggressive mode for the
initial exchange with the gateway and VPN clients uses a default Preshared Key for
authentication.
Step 12 Click OK.