Filter
Top Products
Firewall Settings > BWM
723
SonicOS 5.8.1 Administrator Guide
Step 1 Navigate to the Firewall > Access Rules page.
Step 2 Click the Configure icon for the rule you want to edit.
The Edit Rule
General tab dialog is displayed.
Step 3 Click the Ethernet BWM tab.
Step 4 Select the checkboxes, select the Bandwidth Priority, and then click OK.
Note All priorities will be displayed (Realtime – Lowest) regardless if all have been configured. Refer
to the Firewall Settings > BWM page to determine which priorities are enabled. If the Bandwidth
Management Type is set to Global and you select a Bandwidth Priority that is not enabled, the
traffic is automatically mapped to the level 4 priority (Medium). For a BWM Type of WAN, the
default priority is level 7 (Low).
Step 5 Verify that BWM has been set.