Filter
Top Products
SonicPoint > FairNet
598
SonicOS 5.8.1 Administrator Guide
Configuring SonicPoint FairNet Bandwidth Limit Policies
To configure SonicPoint FairNet, perform the following tasks:
1. Navigate to the SonicPoint > FairNet page.
2. Select the Enable FairNet checkbox
3. Click Accept at the top of the page.
4. Click the Add button to add a SonicPoint FairNet policy for an IP address or range of
addresses. The Add FairNet Policy window displays.
5. By default the Enable Policy option is checked. Disable this checkbox to disable the
FairNet policy.
6. In the Direction pulldown menu, select whether the bandwidth limits for the policy will apply
to clients uploading content, downloading content, or both directions:
–
Both Directions
–
Downlink (AP to Client)
–
Uplink (Client to AP)
7. In the Start IP and End IP fields, specify the IP address range that the policy will apply to.
Tip The IP address range must be on a subnet that is configured for a WLAN interface.