Filter
Top Products
SonicPoint Deployment Best Practices
538
SonicOS 5.8.1 Administrator Guide
• no lldp enable
• mdix on
• mdix auto
• no port storm-control broadcast enable
Sample D-Link switch configuration
The D-Link PoE switches do not have a CLI, so you will need to use their web GUI. Note that
D-Link recommends upgrading to Firmware Version 1.20.09 if you are using multicast in your
environment.
Disable spanning-tree, broadcast storm control, LLDP and the Safeguard Engine on the switch
before adding SonicPoints to the switch, as all may impact their successful provisioning,
configuration, and functionality.