Filter
Top Products
Configuring WAN Acceleration
1343
SonicOS 5.8.1 Administrator Guide
Verifying WAN Acceleration Configurations
This section details how to verify if the TCP Acceleration and WFS Acceleration on your
SonicWALL WXA series appliance is configured correctly.
Verifying the TCP Acceleration Configuration
After you complete the TCP Acceleration configuration procedures, verify TCP Acceleration is
working by checking the WAN Acceleration > Statistics Tab.
Step 1 On the SonicWALL NSA/TZ series appliance user interface, navigate to the WAN Acceleration
> Statistics Tab.
Figure 54 Verifying TCP Acceleration
Step 2 View the statistics data and graphs to verify TCP Acceleration.
This indicates if the SonicWALL WXA series appliance is using TCP
Acceleration for data
transfer.
If the Statistics tab data and graphs do not display
any information, TCP Acceleration is not
configured correctly or is disabled.
Step 3 Refer to the “Configuring WAN Acceleration” on page 1309 and check the TCP Acceleration
panel on the Status page for details.