Filter
Top Products
User Management
1087
SonicOS 5.8.1 Administrator Guide
Configuring Your SonicWALL Appliance for Browser NTLM Authentication
To use single sign-on, your SonicWALL security appliance must be configured to use either
SonicWALL SSO Agent or Browser NTLM authentication only as the SSO method.
The following procedure describes how to configure your SonicWALL security appliance to use
Browser NTLM authentication only. Perform the following steps:
Step 1 Log in to your SonicWALL security appliance and navigate to Users > Settings.
In the Single-s
ign-on method drop-down menu, select Browser NTLM authentication only.
Step 2 Click Configure. The SonicWALL SSO Agent Configuration window displays.
Step 3 Click the Settings tab. Configuration on the Settings tab is the same as the configuration for
the NTLM tab when SonicWALL SSO Agent is selected as the Single-sign-on method. Refer to
Step 34 in the procedure in “Configuring Your SonicWALL Secur
ity Appliance for SonicWALL
SSO Agent” on page 1077 for detailed configuration instructions for this p
age.
Step 4 Click the Users tab. The User Settings page displays.
Step 5 Check the box next to Allow only users listed locally to allow only users listed locally on the
appliance to be authenticated.
Step 6 Check the box next to Simple user names in local database to use simple user names. When
selected, the domain component of a user name will be ignored. User names returned from the
authentication agent typically include a domain component, for example, domain1/user1. If this
box is not checked, user names in the local database must match exactly the full names
returned from the agent, including the domain component.
Step 7 To use LDAP to retrieve user information, select the Use LDAP to retrieve user group
information radio button. Click Configure to configure the LDAP settings. The LDAP
Configuration page displays. For configuration information for this page, refer to “Advanced
LDAP Configuration” on page 1090.