Filter
Top Products
SonicPoint > Virtual Access Point
573
SonicOS 5.8.1 Administrator Guide
Wireless Settings Tab
Step 1 In the Wireless tab, check the Only allow traffic generated by a SonicPoint checkbox.
Step 2 Select the checkbox for WiFiSec Enforcement to enable WiFiSec security on this connection.
Step 3 Select Trust WPA/WPA2 traffic as WiFiSec to enable WPA/WPA2 users access to this
connection.
Step 4 Select a provisioning profile from the SonicPoint Provisioning Profile drop-down menu (if
applicable).
Step 5 Click the OK button to save these changes.
Your new zone now appears at the bottom of the Network > Zones page, although you may
notice it is not yet linked to a Member Interface. This is your next step.