Filter
Top Products
3G
442
SonicOS 5.8.1 Administrator Guide
3. In the Probe Type menu, select one of the following options:
–
Probe succeeds when either Main Target or Alternate Target responds
–
Probe succeeds when both Main Target and Alternative Target respond
–
Probe succeeds when Main Target responds
–
Succeeds Always (no probing)
4. For both the Main Target and, when applicable, the Alternate Target configure the
following:
a. Select Ping (ICMP) or TCP from the Probe Target menu.
b. Enter the IP address of the main target device in the IP Address field.
Tip To have the SonicWALL security appliance send 3G probes to the default gateway received
during 3G negotiation, leave the IP address field as 0.0.0.0.
c. If the probe target is using TCP, enter a port number in the Port field.
3G_advanced
3G > Advanced
The 3G > Advanced page is used to configure the following features:
• “Remotely Triggered Dial-Out” on page 442
• “Bandwidth Management” on page 443
• “Connection Limit” on page 443
Remotely Triggered Dial-Out
Before configuring the Remotely Triggered Dial-Out feature, ensure that your configuration
meets the following prerequisites:
• The 3G profile is configured for dial-on-data.