Filter
Top Products
Configuring WAN Acceleration
1344
SonicOS 5.8.1 Administrator Guide
Verifying the WFS Acceleration Configuration
After completing the step-by-step WFS Acceleration configuration procedures. Verify WFS
Acceleration is working by two different methods:
• Click the Test Configuration button in the WFS Acceleration > Domain Details tab.
• Click the Run WFS Configuration Tests button in the WFS Acceleration > Tools tab.
Verify Using the WFS Acceleration > Domain Details Tab
To verify that the WFS Acceleration was successful using the WFS Acceleration > Domain
Details tab, perform the following steps:
Step 1 Navigate to the WAN Acceleration > WFS Acceleration page.
Step 2 Select the Domain Details tab.
Step 3 Click Test Configuration.
If the WFS Acceleration service is not functionin
g properly, refer to “Configuring WFS
Acceleration” section on page 1326 and check the configuration settings.