Filter
Top Products
Configuring WAN Acceleration
1321
SonicOS 5.8.1 Administrator Guide
Configuring a Routing Policy for Incoming Traffic
The steps in this section are configured from the Remote Site. Follow the same steps for
configuring the Data Center.
Step 1 Navigate to the Network > Address Objects page.
Figure 44 Network > Address Objects
Step 2 Click the Add button.
The Add
Address Object Group pop-up window displays.
Figure 45 Add Address Object Group
Step 3 Enter a name (Remote Site) for the address object in the Name text field.
Step 4 Click the Zone Assignment drop-down, select LAN.
Step 5 Click the Type drop-down, select Network.
Step 6 Enter the LAN IP address of the Remote Site (192.168.20.0) in the Network text field.
Step 7 Enter the netmask IP address (255.255.255.0) in the Netmask text field.
Step 8 Click the Add button.