Filter
Top Products
SonicPoint > RF Management
583
SonicOS 5.8.1 Administrator Guide
Enabling RF Management on SonicPoint(s)
In order for RF Management to be enforced, you must enable the RF Management option on
all available SonicPoint devices. The following section provides instructions to re-provision all
available SonicPoints with RF Management enabled.
Step 1 Navigate to SonicPoint > SonicPoints in the SonicWALL security appliance management
interface.
Step 2 Click the Configure button corresponding to the desired SonicPoint Provisioning Profile.
Step 3 In the General tab, click the Enable RF Management checkbox.
Next, to ensure all SonicPoints are updated with the RF
Management feature enabled, it is
necessary to delete all current SonicPoints from the SonicPoint table and re-synchronize these
SonicPoints using the profile you just created.
Step 4 Click the Delete All button at the bottom right corner of the SonicPoints table.
Step 5 Click the Synchronize SonicPoints button at the top of the page.
Your SonicPoints will now reboot with the RF Management feature enabled. Be patient as the
reboot process may take several minutes.