Filter
Top Products
User Management
1086
SonicOS 5.8.1 Administrator Guide
Step 43 Select the Check agent connectivity radio button and then click the Test button. This will test
communication with the authentication agent. If the SonicWALL security appliance can connect
to the SSO agent, you will see the message Agent is ready. If testing a TSA, the Test Status
field displays the message, and the version and server IP address are displayed in the
Information returned from the agent field.
Step 44 For SSO agents only, select the Check user radio button, enter the IP address of a workstation
in the Workstation IP address field, then click Test. This will test if the SSO agent is properly
configured to identify the user logged into a workstation.
Tip If you receive the messages Agent is not responding or Configuration error, check your
settings and perform these tests again.
Step 45 When you are finished with all Authentication Agent configuration, click OK.