Filter
Top Products
Configuring WAN Acceleration
1309
SonicOS 5.8.1 Administrator Guide
Configuring WAN Acceleration
This section includes procedures for configuring the SonicWALL WXA series appliance. All
configuration procedures are performed on the SonicWALL NSA/TZ series appliance’s
management interface. Refer to “Configuration Task List Overview” section on page 1274 for
details on the SonicWALL NSA/TZ management interface.This section includes the following
subsections:
• “Configuring the Network Interface for the SonicWALL WXA Series Appliance” section on
page 1309
• “Configuring TCP Acceleration” section on page 1315
• “Configuring WFS Acceleration” section on page 1326
• “Verifying WAN Acceleration Configurations” section on page 1343
Configuring the Network Interface for the SonicWALL WXA Series
Appliance
To configure your SonicWALL NSA/TZ to be used with the WXA series appliance, perform the
following steps:
Step 5 Open a Web browser.
Step 6 Enter https://nsatzipaddress.
The SonicWALL user interface is displayed.
Step 7 Navigate to the Network > Interfaces page.
Step 8 Click the Edit button in the row for the port you want the SonicWALL WXA series appliance to
be connected to.