Filter
Top Products
994
Marker
Fixed Marker X-axis Value
Fixed Marker Y-axis Value
Off
Turns off the selected marker and its marker function setting, if any. However, Off does not affect which
marker is selected.
Key Path Marker, Fixed
Example :CALC:MARK:MODE FIX sets Marker 1 to Fixed.
Notes See the description under the “Marker” key, above.
Dependencies You cannot directly set the X or Y value of a Fixed marker which has a marker
function turned on. If an attempt is made to actually adjust it while a Marker
Function is on, a message is generated. If the key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same
message is generated as part of a “–221, Settings conflict” warning.
you cannot directly set the Y value of a Fixed marker while Normalize is
turned on. If an attempt is made to do so while Normalize is on, a message is
generated. If the key is pressed, an advisory message is generated. If the
equivalent SCPI command is sent, this same message is generated as part of a
“–221, Settings conflict” warning.
State Saved The marker control mode (Normal, Delta, Fixed, Off) and X and Y-axis values
are saved in instrument state
Initial S/W Revision Prior to A.02.00
Key Path
Marker, Fixed
Example :CALC:MARK:MODE FIX sets Marker 1 to Fixed.
Notes See the description under the
Marker key, above.
Dependencies you cannot directly set the X or Y value of a Fixed marker which has a marker
function turned on. If an attempt is made to actually adjust it while a Marker
Function is on, a message is generated. If the key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same
message is generated as part of a “–221, Settings conflict” warning.
State Saved The marker control mode (Normal, Delta, Fixed, Off) and X and Y-axis values
are saved in instrument state
Default Unit depends on the current selected Y axis unit
Initial S/W Revision Prior to A.02.00
Key Path
Marker
Example :CALC:MARK:MODE OFF sets Marker 1 to Off.