Filter
Top Products
609
Occupied Bandwidth Measurement
Marker
Marker Type
Sets the marker control mode to Normal, Delta or Off, If the selected marker is Off, pressing Marker sets
it to Normal and places a single marker at the center of the display. At the same time,
Marker X Axis
Value
appears on the Active Function area.
Properties
Accesses the marker properties menu.
Max: 9.9E+37
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00
Key Path:
Marker
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: :CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:M
ODE POSition|DELTa|OFF
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:M
ODE?
Example: CALC:OBW:MARK:MODE POS
CALC:OBW:MARK:MODE?
Notes: If the selected marker is Off, pressing Marker sets it to Normal and places it at
the center of the screen on the trace determined by the
Marker Trace rules. At
the same time,
Marker X Axis Value appears on the Active Function area.
Default Active Function: the active function for the selected marker’s current
control mode. If the current control mode is Off, there is no active function
and the active function is turned off.
Active Function Display: the marker X axis value entered in the active
function area displays the marker value to its full entered precision.
Preset: OFF
State Saved: Saved in instrument state.
Range: Normal | Delta | Off
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00
Key Path:
Marker
Initial S/W Revision: Prior to A.02.00