624
Occupied Bandwidth Measurement
Peak Search
Peak Search
Places the selected marker on the trace point with the maximum y-axis value for that marker’s trace.
Pressing
Peak Search with the selected marker off causes the selected marker to be set to Normal, then
a peak search is immediately performed.
Key Path: Front panel key
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: :CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:M
AXimum
Example: CALC:OBW:MARK2:MAX
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00