Filter
Top Products
11 31
Save
Correction Data File
A Corrections Data File contains a copy of one of the analyzer correction tables. Corrections provide a
way to adjust the trace display for predetermined gain curves (such as for cable loss).
Corrections files are text files in .csv (comma separated values) form, to make them importable into
Excel or other spreadsheet programs. The format for Corrections files is as follows.
Lin
e #
Type of field Example Notes
1 File type, must be
“Amplitude Correction”
Amplitude Correction May not be omitted
2 File Description (in quotes) “Correction Factors for 11966E” 45 characters max; may be empty but
may not be omitted. If exceeds 45
characters, error –233 Too much data
reported
3 Comment (in quotes) “Class B Radiated” 45 characters max; may be empty but
may not be omitted. . If exceeds 45
characters, error –233 Too much data
reported
4 Instrument Version, Model
#
A.02.06,N9020A May be empty but may not be omitted
5 Option List, File Format
Versio n
K03 LFE EXM ,01 May be empty but may not be omitted
6 Freq Unit to be used for all
frequency values in the file
Frequency Unit,MHz assumed to be Hz if omitted
7 Antenna Unit, Antenna Unit,None If omitted leaves the Antenna unit
unchanged. The amplitude unit in the
Antenna Unit field is a conversion
factor that is used to adjust the Y Axis
Units of the current mode, if the mode
supports Antenna Units. For more
details on antenna correction data, refer
to the Input/Output,Corrections key
description. Allowable values:
dBuv/m, dBuA/m, dBG, dBpT, None
8 Freq Interpolation Frequency Interpolation,Linear if omitted leaves the Freq Interpolation
unchanged. Allowable values: Linear,
Logarithmic
9 Bias value in mA Bias,0.00 If omitted leaves the Bias value
unchanged (added as of A.08.50)
10 Bias State Bias State,On If omitted leaves the Bias State
unchanged. Allowable values: On, Off
(added as of A.08.50)