Filter
Top Products
201
System Functions
Recall
These keys allow you to import a Tab separated or .txt file that will automatically setup all the
parameters required for building a Sequence. The parameters will automatically be loaded into the
Stated Sequencer.
Once selected, in order to import the selected Sequence Type you must select the Open key in the Source
Sequence menu.
Source Sequence
The list of parameters, that configure steps, that makes up a sequence for the Source.
The Source sequence is a sequence of flexible configurable steps that can be set anywhere in the
instruments frequency range.
Analyzer Sequence
Only Available in: Sequence Analyzer Mode
The list of parameters, that configure steps, that makes up a sequence for the Analyzer.
The Analyzer sequence is a sequence of flexible configurable steps that can be set anywhere in the
instruments frequency range for measuring the performance of a transmitters output
Key Path: Recall, Sequences
Mode: All
Remote Command: :MMEMory:LOAD:SEQuences:|SLISt |ALISt|SAAList|
"MySequence.txt"
Example: :MMEM:LOAD:SEQ:SLIS "MySequence.txt"
Notes: Available file types are:
CSV (Comma delimited) (*.csv)
Text (Tab delimited) (*.txt)
Initial S/W Revision: A.05.00
Key Path:
Recall,Sequences
Example: :MMEM:LOAD:SEQ:SLIS "MySequence.txt"
Dependencies: Only available in XOBT
Initial S/W Revision: A.05.00
Key Path:
Recall,Sequences
Example: :MMEM:LOAD:SEQ:ALIS "MySequence.txt"
Dependencies: Only available in XOBT, Sequence Analyzer mode
Initial S/W Revision: A.05.00