Filter
Top Products
280
System Functions
System
HiSLIP Server
Turns the HiSLIP server capability On or Off, enabling you to limit SCPI access over LAN through the
HiSLIP server.
HiSLIP stands for High Speed LAN Instrument Protocol and is part of the IVI–6.1 specification.
Here is an example of a VISA connection string used to connect to the HiSLIP Server on an X-Series
Spectrum Analyzer:
TCPIP0::a-n9030a–93016::hislip0::INSTR
In the example above, hislip0 is the HiSLIP device name that VISA users must include in their HiSLIP
VISA Address strings. Your HiSLIP device name may be different depending on your VISA settings.
Emulated GPIB Logical Unit The unique integer assigned to your device when it is being
controlled using SICL LAN
8
Emulated GPIB Address The emulated GPIB address assigned to your transmitter
tester when it is a SICL server (the same as your GPIB
address)
18
Key Path:
System, I/O Config, SCPI LAN
Mode: All
Remote Command: :SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle?
Example: :SYST:COMM:LAN:SCPI:SICL:ENAB OFF
Preset: This is unaffected by Preset, but is set to ON with a “Restore System
Defaults->Misc”
State Saved: No
Range: On | Off
Initial S/W Revision: Prior to A.02.00
Key Path:
System, I/O Config, SCPI LAN
Mode: All
Remote Command: :SYSTem:COMMunicate:LAN:SCPI:HISLip:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:HISLip:ENABle?
Example: :SYST:COMM:LAN:SCPI:HISL:ENAB OFF
Preset: This is unaffected by Preset, but is set to ON with a “Restore System
Defaults->Misc”
State Saved: No
Parameter Description Setting