Filter
Top Products
11 95
Source (Internal)
Current Segment
Specifies the selected sequence segment that will be affected by the menu functions.
Insert New Waveform
Allows you access to the sub-menu for inserting a new waveform segment or sequence. Pressing this key also
changes the central display to show the Waveform File Selection View.
Insert Waveform
Inserts the currently highlighted waveform to the end of the waveform sequence. Pressing this key also returns you
to the menus for creating or editing a sequence, and returns the central view to the sequence creation view.
Segments on Hard Disk
This key functions the same as section “Segments on Hard Disk” on page 1174.
Load Segment To ARB Memory
This key functions the same as section “Load Segment To ARB Memory” on page 1175.
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence
Notes: No remote command, front panel only. This key is grayed out and unavailable
if the sequence is currently empty.
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence
Notes: No remote command, front panel only.
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence, Insert New Waveform
Notes: No remote command, front panel only.
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence, Insert New Waveform
Initial S/W Revision: Prior to A.09.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence, Insert New Waveform, Segments on Hard Disk
Initial S/W Revision: Prior to A.09.00