Filter
Top Products
1222
Source (Internal)
insert more steps, maximum number of steps reached”
Delete Step
Allows you to delete the current step. Deleting a step will automatically decrease the Step Count
parameter by 1. If sequence only has one step left, delete step will be rejected and popup error –221,
“Setting conflict; Cannot delete current step, minimum number of steps reached”
Clear List
Allows you to clear the list. Clearing the list sets the number of steps to the default value of 1 and sets the
parameters for the only step to their default values.
Step Trigger
Allows access to the sub-menu for selecting the trigger input for the current step.
Key Path: Source, List Sequencer, List Sequencer Setup
Notes: No remote command, front panel only. If the list already contains the
maximum limit of 1000 steps, no operation will be made after pressing this
key.
Initial S/W Revision: A.05.00
Key Path:
Source, List Sequencer, List Sequencer Setup
Notes: No remote command, Front Panel key only.
If the list already contains the minimum limit of 1 step, no operation will be
made after pressing this key
Initial S/W Revision: A.05.00
Key Path:
Source, List Sequencer, List Sequencer Setup
Initial S/W Revision: A.05.00
Key Path:
Source, List Sequencer, List Sequencer Setup
Remote Command: :SOURce:LIST:STEP[1]|2|3…1000:SETup:INPut:TRIGger
IMMediate|INTernal|EXTernal2|KEY|BUS
:SOURce:LIST:STEP[1]|2|3…1000:SETup:INPut:TRIGger?
Example: SOUR:LIST:STEP2:SET:INP:TRIG BUS
SOUR:LIST:STEP2:SET:INP:TRIG?
Notes: SCPI is supported after A.09.40
Preset: Free Run
Range: Free Run | Internal | Manual (Trigger Key) | Bus | External 2
Initial S/W Revision: A.05.00