Filter
Top Products
285
System Functions
System
Restore Defaults
Provides incremental initialization of the system setting groups along with supporting a comprehensive
reset of the entire instrument back to a factory default state. The menu selections are the groups of
system settings and when one is selected, that particular group of system settings is reset back to their
default values.
Restore Input/Output Defaults
Causes the group of settings and data associated with Input/Output front-panel key to be a reset to their
default values. This level of Restore System Defaults does not affect any other system settings, mode
settings and does not cause a mode switch. .
Confirmation is required to restore the Input/Output setting. The confirmation dialog is:
Restore Power On Defaults
This selection causes the Power On settings to be a reset to their default value. This level of Restore
System Defaults does not affect any other system settings, mode settings and does not cause a mode
switch. The Power On settings and their default values are Power On Type reset to Mode and
Input/Output Defaults and Power On Application reset to whatever the factory set as its default value.
Confirmation is required to restore the factory default values. The confirmation dialog is:
Key Path: System
Mode: All
Remote Command: :SYSTem:DEFault [ALL]|ALIGn|INPut|MISC|MODes|PON
Example: SYST:DEF
State Saved: No
Initial S/W Revision: Prior to A.02.00
Key Path:
System, Restore System Defaults
Example: :SYST:DEF INP
Initial S/W Revision: Prior to A.02.00