420
ACP Measurement
Meas Setup
Offset BW
Accesses the offset bandwidth menu.
Res BW
Sets the resolution bandwidth. If an unavailable bandwidth is entered with the numeric keypad, the
closest available bandwidth is selected.
Modified at S/W Revision A.02.00, A.03.00
Key Path
Meas Setup, Offset/Limits
Initial S/W Revision Prior to A.02.00
Key Path
Meas Setup, Offset/Limits
Mode WCDMA, C2K, 1xEVDO, LTE
Remote Command [:SENSe]:ACPower:OFFSet[1]|2:LIST:BANDwidth:RESolution
<bandwidth>, <bandwidth>, <bandwidth>, <bandwidth>,
<bandwidth>, <bandwidth>
[:SENSe]:ACPower:OFFSet[1]|2:LIST:BANDwidth:RESolution?
[:SENSe]:ACPower:OFFSet[1]|2:LIST:BANDwidth:RESolution:
AUTO ON|OFF|1|0, ON|OFF|1|0, ON|OFF|1|0, ON|OFF|1|0,
ON|OFF|1|0, ON|OFF|1|0
[:SENSe]:ACPower:OFFSet[1]|2:LIST:BANDwidth:RESolution:
AUTO?
Example ACP:OFFS2:LIST:BAND:RES
220kHz,220kHz,220kHz,220kHz,220kHz,220kHz
ACP:OFFS2:LIST:BAND:RES?
ACP:OFFS2:LIST:BAND:RES:AUTO 1,1,1,1,1,1
ACP:OFFS2:LIST:BAND:RES:AUTO?
Notes This key is available only in the IBW mode.
Offset sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Couplings When Res BW Mode is AUTO, this value is exactly same as Res BW under
BW key. And when this value is changed by user, Res BW Mode is also
changed to Man.