Filter
Top Products
634
Occupied Bandwidth Measurement
Span X Scale
Full Span
Changes the Occupied Bandwidth Span to show the full frequency range of the analyzer. When using
external mixing, it changes the displayed frequency span to the frequency range specified for the
selected external mixing band.
Last Span
Changes the measurement frequency span to previous measurement span setting. If there is no existing
previous span value then the span remains unchanged.
Max: Hardware Dependent:
Option 503 = 3.7 GHz
Option 504 = 3.9 GHz
Backwards Compatibility SCPI: [:SENSe]:EBWidth:FREQuency:SPAN
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00, A.10.00
Key Path:
Span X Scale
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: [:SENSe]:OBWidth:FREQuency:SPAN:FULL
Example: OBW:FREQ:SPAN:FULL
Notes: You must be in the W-CDMA mode, cdma2000 mode, TD-SCDMA mode,
BLUETOOTH mode, LTE mode, LTE TDD mode, WLAN mode, 1xEVDO
mode, or WIMAX OFDMA mode to use this command.
Use:INSTrument:SELect to set the mode.
Couplings: Selecting full span changes the measurement span value.
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00
Key Path:
Span X Scale
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: [:SENSe]:OBWidth:FREQuency:SPAN:PREVious
Example: OBW:FREQ:SPAN:PREV
Notes: You must be in the W-CDMA mode, cdma2000 mode, TD-SCDMA mode,
BLUETOOTH mode, LTE mode, LTE TDD mode, WLAN mode, 1xEVDO
mode, or WIMAX OFDMA mode to use this command.
Use:INSTrument:SELect to set the mode.