Filter
Top Products
111 9
Recall
Recall
Most of the functions under this key work the same way in many measurements, so they are documented
in “Recall” on page 192.[
The Amplitude Correction Import Data function under Recall is documented here.
Amplitude Correction
This key selects the Amplitude Corrections as the data type to be imported. When pressed a second time,
it brings up the Select Menu, which lets you select the Correction into which the data will be imported.
Amplitude Corrections are fully discussed in the documentation of the Input/Output key, under the
Corrections softkey.
A set of preloaded Corrections files can be found in the directory
/My Documents/ EMC Limits and Ampcor.
Under this directory, the directory called Ampcor (Legacy Naming) contains a set of legacy corrections
files, generally the same files that were supplied with older Agilent EMI analyzers, that use the legacy
suffixes .ant, .oth, .usr, and .cbl, and the old 8-character file names. In the directory called Ampcor, the
same files can be found, with the same suffixes, but with longer, more descriptive filenames.
When the Amplitude Correction is an Antenna correction and the Antenna Unit in the file is not
None,
the Y Axis Unit setting will change to match the Antenna Unit in the file.
Key Path: Recall
Mode: EDGEGSM
Remote Command: :MMEMory:LOAD:CORRection 1|2|3|4|5|6, <filename>
Example: :MMEM:LOAD:CORR 2 "myAmpcor.csv" recalls the Amplitude Correction
data from the file myAmpcor.csv in the current directory to the 2nd Amplitude
Correction table, and turns on Correction 2.
The default path is My Documents\amplitudeCorrections.