Filter
Top Products
1350
Trigger
falling edge.
Trig Delay
Controls a time delay during that the analyzer will wait to begin a sweep after meeting the trigger
criteria. You can use negative delay to pre-trigger the instrument in the time domain or FFT, but not in
swept spans.
Key Path: Trigger, Video
Remote Command: :TRIGger[:SEQuence]:VIDeo:SLOPe POSitive|NEGative
:TRIGger[:SEQuence]:VIDeo:SLOPe?
Example: TRIG:VID:SLOP NEG
Preset: POSitive
State Saved: Saved in instrument state
Backwards Compatibility SCPI: :TRIGger[:SEQuence]:IF:SLOPe NEGative|POSitive
:TRIGger[:SEQuence]:IF:SLOPe?
For backward compatibility with VSA/PSA comms apps
Backwards Compatibility Notes: The legacy :TRIGger[:SEQuence]:SLOPe command affects the slopes for the
VID, LINE, EXT1, EXT2, and RFB triggers.
Initial S/W Revision: Prior to A.02.00
Remote Command: :TRIGger[:SEQuence]:SLOPe POSitive|NEGative
:TRIGger[:SEQuence]:SLOPe?
Example: TRIG:SLOP NEG
Preset: POSitive
State Saved: Saved in instrument state
Backwards Compatibility Notes: In ESA/PSA, the Trigger Slope was global to all triggers. In the X-Series, the
slope can be set individually for each Trigger Source. For backward
compatibility, the global SLOPe command updates all instances of trigger
slope (VID, LINE, EXT1, EXT2, TV, RFB). The query returns the trigger
slope setting of the currently selected trigger source.
Initial S/W Revision: Prior to A.02.00
Key Path:
Trigger, Video
Remote Command: :TRIGger[:SEQuence]:VIDeo:DELay <time>
:TRIGger[:SEQuence]:VIDeo:DELay?
:TRIGger[:SEQuence]:VIDeo:DELay:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:VIDeo:DELay:STATe?