Filter
Top Products
398
ACP Measurement
Marker
Marker Trace
Selects the trace that you want your marker to be placed on. A marker is associated with one and only
one trace. This trace is used to determine the placement, result, and X Axis Scale of the marker. All
markers have an associated trace, even
Fixed markers; it is from that trace that they determine their
attributes and behaviors, and it is to that trace that they go when they become Normal or Delta markers.
Notes A marker cannot be relative to itself so that choice is grayed out, and if sent
from SCPI generates error –221: “Settings conflict; marker cannot be relative
to itself.”
When queried a single value will be returned (the specified marker numbers
relative marker).
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Dependencies Unavailable when “Meas Method” on page 433 is set to RBW.
Preset 2|3|4|5|6|7|8|9|10|11|12|1
State Saved Saved in instrument state.
Min 1
Max 12
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path
Marker, Properties
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:T
RACe 1|2|3
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:T
RACe?
Example CALC:ACP:MARK2:TRAC 2
CALC:ACP:MARK2:TRAC?
Notes If the selected marker is Off, pressing Marker sets it to Normal and places it at
the center of the screen on the trace determined by the
Marker Trace rules. At
the same time,
Marker X Axis Value appears on the Active Function area.
Default Active Function: the active function for the selected marker’s current
control mode. If the current control mode is Off, there is no active function
and the active function is turned off.
Active Function Display: the marker X axis value entered in the active
function area will display the marker value to its full entered precision.
Dependencies Unavailable when “Meas Method” on page 433 is set to RBW.