Filter
Top Products
11 97
Source (Internal)
Query ARB Memory File List (Remote Command Only)
This key functions the same as section Query “Query ARB Memory File List (Remote Command Only)” on
page 1179
Edit Selected Waveform
Allows access to the sub-menus for editing the details of the currently selected waveform segment.
Repetitions
Allows you to specify the number of times the currently selected waveform is played within the sequence.
Marker 1
Allows you to enable or disable marker 1 for the currently selected waveform. For a waveform sequence, you can
enable and disable markers on a per-segment basis, allowing you to output markers from some waveform segments
within the sequence but not for others.
Marker 2
Allows you to enable or disable marker 2 for the currently selected waveform. For a waveform sequence, you can
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence, Insert New Waveform, Segments in ARB Memory
Initial S/W Revision: Prior to A.09.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence
Notes: No remote command, front panel only.
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence, Edit Selected Waveform
Notes: No remote command, front panel only.
Preset: 1
Min: 1
Max: TBD
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Edit Selected
Sequence, Edit Selected Waveform
Notes: No remote command, front panel only.
Preset: Enabled
Range: Enabled|Disabled
Initial S/W Revision: A.05.00