Filter
Top Products
653
Code Domain
4 Active Status:
Returns series of floating point numbers that show either active or inactive of each code
returned in n=2 and 3. When the code is inactive, the result is 0.0, otherwise more than 0.0
In BTS mode, IQ combined results are returned.
1st number = Active or inactive flag of the 1st code.
….
Nth number = Active or inactive flag of the Nth code.
In MS mode, I and Q results are returned alternatively.
1st number = 1st In Phase code active flag.
2nd number = 1st Quad Phase code active flag.
….
(2xN–1)th number = Nth In Phase code active flag
(2xN)th number = Nth Quad Phase code active flag
5
<EVM>
Symbol EVM:
Returns series of floating point numbers (in percent) that represent each sample in the EVM
trace. The first number is the symbol 0 decision point. There are X points per symbol
(X=points/chip). Therefore, the decision points are at 0, 1*X, 2*X, …
6
<MERRor>
Symbol Magnitude error:
Returns series of floating point numbers (in percent) that represent each sample in the
magnitude error trace. The first number is the symbol 0 decision point. There are X points per
symbol (X=points/chip). Therefore, the decision points are at 0, 1*X, 2*X, …
7
<PERRor>
Symbol Phase error:
Returns series of floating point numbers (in percent) that represent each sample in the phase
error trace. The first number is the symbol 0 decision point. There are X points per symbol
(X=points/chip). Therefore, the decision points are at 0, 1*X, 2*X, …