Filter
Top Products
395
ACP Measurement
Marker
Marker X Axis Value (Remote Command Only)
Sets the marker X axis value in the current marker X Axis Scale unit. This value has no effect if the
control mode is
Off, but is the SCPI equivalent of entering an X value if the control mode is Normal,
Delta or Fixed.
Notes If the selected marker is Off, pressing Marker sets it to Normal and places it at
the center of the screen on the trace determined by the
Marker Trace rules. At
the same time,
Marker X Axis Value appears on the Active Function area.
Default Active Function: the active function for the selected marker’s current
control mode. If the current control mode is Off, there is no active function
and the active function is turned off.
Active Function Display: the marker X axis value entered in the active
function area will display the marker value to its full entered precision.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Preset OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF
State Saved Saved in instrument state.
Range Normal|Delta|Off
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:X
<freq>
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:X
?
Example CALC:ACP:MARK3:X 0
CALC:ACP:MARK3:X?
Notes The query returns the marker’s absolute X Axis value if the control mode is
Normal, or the offset from the marker’s reference marker if the control mode
is
Delta. If the marker is Off the response is not a number.
Dependencies Unavailable when “Meas Method” on page 433 is set to RBW.
Preset After a preset, all Markers are turned OFF, so Marker X Axis Value query will
return a not a number (NAN).
State Saved No
Min –9.9E+37
Max 9.9E+37
Initial S/W Revision Prior to A.02.00