Filter
Top Products
11 91
Source (Internal)
Delete Segment
Allows you to delete the selected segment from the waveform sequence.
Save Sequence…
Pressing this key displays the “Save As” dialog. The sequence name is passed to the save as dialog to use as the
filename for saving, and the directory the save as dialog will open into is the default waveform directory.
Build New Sequence (Remote Command Only)
This command is the SCPI equivalent of the waveform sequence creation features described in “Build New
Sequence” on page 1186.
This command writes a waveform sequence file to the hard disk. You must specify the waveform sequence file path
and filename which will be saved on the hard disk, and the waveform segment file path and name which will be
nested into the waveform sequence file. You can utilize mass storage unit specifier (MSUS) “NVWFM” or use a
real full path representation. See the example below. MSUS “NVWFM” is mapped to D:\NVARB directory on test
set hard disk.
Any number of segments, up to a segment count limit of 64, can be used to create a sequence. Repeated segments
are included in the count limit.
Each waveform segment name string length upper limit is 128 chars. Please do NOT insert waveform which name
string exceeds 128 chars.
The internal source does not support nesting one waveform sequence file into another waveform sequence file.
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence
Notes: No remote command, front panel only.
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence
Initial S/W Revision: A.05.00
Remote Command: :SOURce:RADio:ARB:SEQuence[:MWAVeform] <filename>,
<waveform1>, <reps>,
NONE|M1|M2|M3|M4|M1M2|M1M3|M1M4|M2M3|M2M4|M3M4|M1M2M3|M
1M2M4|M1M3M4|M2M3M4|M1M2M3M4|ALL, {<waveform2>, <reps>,
NONE|M1|M2|M3|M4|M1M2|M1M3|M1M4|M2M3|M2M4|M3M4|M1M2M3|M
1M2M4|M1M3M4|M2M3M4|M1M2M3M4|ALL, } …
(For additional description of each item, see Notes below “For Setup SCPI”
on page 1193“For Setup SCPI”.)
:SOURce:RADio:ARB:SEQuence[:MWAVeform]? <filename>
(For additional description of each item, see Notes “For Query SCPI” on
page 1194 below.)