Filter
Top Products
1099
Mode
Bluetooth
Selects the Bluetooth mode for Bluetooth specific measurements. There are several measurements
available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
cdma2000
Selects the cdma2000 mode for general purpose measurements of signals following this standard. There
are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
GSM/EDGE/EDGE Evo
Selects the GSM with EDGE mode for general purpose measurements of signals following this standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
IQ Analyzer (Basic)
The IQ Analyzer Mode makes general purpose frequency domain and time domain measurements. These
measurements often use alternate hardware signal paths. These frequency domain and time domain
measurements can be used to output I/Q data results when measuring complex modulated digital signals.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
Key Path: Mode
Example: INST:SEL BT
INST:NSEL 228
Initial S/W Revision: A.06.01
Key Path:
Mode
Example: INST:SEL CDMA2K
INST:NSEL 10
Initial S/W Revision: Prior to A.02.00
Key Path:
Mode
Example: INST:SEL EDGEGSM
INST:NSEL 13
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00