Filter
Top Products
721
Code Domain
View/Display
CDP Graph and CDE Graph
Provides a combination view of the code domain power graph and the code domain error. These two
windows have the same view settings as the Power Graph & Metrics view.
I/Q Error (Quad View)
Provides a combination view of magnitude error, phase error, Symbol EVM, and the summary data.
There is no view settings for this view.
Code Domain (Quad View)
Provides a combination view for the code domain power symbol power, I/Q symbol polar vector and the
summary data. The Code Domain Power window has the same view settings as the Power Graph &
Metrics. The Symbol Power window has the view setting of Composite Chip Power.
Composite Chip Power
Toggles the composite chip power display function between On and Off.
Restriction and Notes This key is displayed only when the CDP window is selected.
This key shall be grayed out when the Code Order Bit Reverse key is selected.
If set to On, the corresponding Walsh code channel power is marked in the
different color upon placing the marker at the consolidated Walsh code
channel power
Remote Command Notes You must be in the cdma2000 mode to use this command. Use
INSTrument:SELect to set the mode.
Preset ON
State Saved Saved in instrument state.
Range Off|On
Key Path
View/Display, Power Graph & Metrics
Key Path View/Display
Key Path View/Display
Key Path View/Display
Mode cdma2000
Remote Command :DISPlay:CDPower:CPOWer[:STATe] 0|1|OFF|ON
:DISPlay:CDPower:CPOWer[:STATe]?
Example DISP:CDP:CPOW ON
DISP:CDP:CPOW?