Filter
Top Products
230
System Functions
System
Power On Application
Accesses a menu that lists the available Modes and lets you select which Mode is to be the power-on
application.
This application is used for Power On Type “Mode and Input/Output Defaults” and Restore System
Defaults All.
Configure Applications
The Configure Applications utility can be used to:
select applications for preload
determine how many applications can fit in memory at one time
specify the order of the Modes in the Mode menu.
This utility consists of a window with instructions, a set of “Select Application” checkboxes, a “fuel bar”
style memory gauge, and keys that help you set up your configuration.
For more information, see the following topics:
“Preloading Applications” on page 231
“Access to Configure Applications utility” on page 231
“Virtual memory usage” on page 231
Initial S/W Revision: Prior to A.02.00
Key Path:
System, Power On
Mode: All
Remote Command: :SYSTem:PON:MODE
SA|BASIC|ADEMOD|NFIGURE|PNOISE|CDMA2K|TDSCDMA|VSA|VSA89
601|WCDMA|WIMAXOFDMA
:SYSTem:PON:MODE?
Example: SYST:PON:MODE SA
Notes: The list of possible modes (and remote parameters) to choose from is
dependent on which modes are installed in the instrument.
Preset: This is unaffected by a Preset but is set on a “Restore System Defaults->All”
to SA.
State Saved: No
Initial S/W Revision: Prior to A.02.00
Key Path:
System, Power On
Example: :SYST:SHOW CAPP Displays the Config Applications screen
Initial S/W Revision: A.02.00