Filter
Top Products
1243
Source (Internal)
CW
Sets the current step to output a CW tone.
Selected Waveform
Inserts the currently selected waveform in the waveform selection view as the waveform for playback during the
current step.
Continue Previous
Sets the current step to continue with playback of the waveform from the previous step. When continuing the
previous waveform, the ARB playback will not pause while the source retunes to the new frequency or amplitude
that may be defined for the new step.
Off
Disable RF outpu of the current step.
Remote Command Notes: String type, takes “Off” | “CW” | “Cont” | “waveform name”
Preset: CW
Range: Waveform | Continue Previous | CW | Off
Initial S/W Revision: A.05.00
Key Path:
Source, List Sequencer, List Sequencer Setup, Waveform
Example: SOUR:LIST:STEP2:SET:WAV “CW”
Notes: SCPI is supported after A.09.40
Initial S/W Revision: A.05.00
Key Path:
Source, List Sequencer, List Sequencer Setup, Waveform
Example: SOUR:LIST:STEP2:SET:WAV “waveform name”
Notes: SCPI is supported after A.09.40
If the selected waveform contains header (which contains ARB play
parameters), source list sequence will automatically apply header settings of
the selected waveform in that step.
Initial S/W Revision: A.05.00
Key Path:
Source, List Sequencer, List Sequencer Setup, Waveform
Example: SOUR:LIST:STEP2:SET:WAV “Cont”
Notes: SCPI is supported after A.09.40
Initial S/W Revision: A.05.00
Key Path:
Source, List Sequencer, List Sequencer Setup, Waveform