Filter
Top Products
11 89
Source (Internal)
Delete All From ARB Memory
This key functions the same as “Delete All From ARB Memory” on page 1178.
Query ARB Memory File List (Remote Command Only)
This command functions the same as “Query ARB Memory File List (Remote Command Only)” on page 1179.
Edit Selected Waveform
Allows access to the sub-menus for editing the details of the currently selected waveform segment.
Repetitions
Allows you to specify the number of times the currently selected waveform is played within the sequence.
Marker 1
Allows you to enable or disable marker 1 for the currently selected waveform. For a waveform sequence, you can
enable and disable markers on a per-segment basis, allowing you to output markers from some waveform segments
within the sequence, but not for others.
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence, Insert New Waveform, Segment in ARB Memory
Initial S/W Revision: Prior to A.09.00
Initial S/W Revision: Prior to A.09.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence
Notes: No remote command, front panel only.
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence, Edit Selected Waveform
Notes: No remote command, SCPIfront panel only.
Preset: 1
Min: 1
Max: 65535
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence, Edit Selected Waveform
Notes: No remote command, front panel only.
Preset: Enabled
Range: Enabled|Disabled