522
Spectrum Emission Mask Measurement
Meas Setup
where N is the multiplier, this setting will automatically be changed to manual.
Key Path: Meas Setup, Offset/Limits
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
WLAN
Remote Command: [:SENSe]:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]
<bandwidth>, …
[:SENSe]:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]
?
[:SENSe]:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]
:AUTO OFF|ON|1|0, …
[:SENSe]:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]
:AUTO?
Example: SEM:OFFS2:LIST:BAND 30.0 kHz, 30.0 kHz, 30.0 kHz, 1.00 MHz,1.00
MHz, 1.00 MHz
SEM:OFFS2:LIST:BAND?
SEM:OFFS:LIST:BAND:AUTO 1,1,1,1,1,1
SEM:OFFS:LIST:BAND:AUTO?
Notes: Comma separated list of values.
OFFSet1 is for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes SEM measurement to use this
command. Use :INSTrument:SELect to set the mode.
Couplings: Coupled to Start and Stop offset and Meas BW multiplier. This parameter
must adhere to the rule (N x Res BW) <= (Stop freq of the offset - Start freq of
the offset), where N is the multiplier. If the multiplier is changed, the Res BW
will be changed to ensure this. When set manually, Res BW Coupling is set to
manual.