Filter
Top Products
1061
Meas Setup
Amplitude
Lets you edit the Amplitude of the current row.
Insert Point Below
Pressing this key inserts a point below the current point. The new point is a copy of the current point and
becomes the current point. The new point is not yet entered into the underlying table, and the data in the
row is displayed in light gray.
Delete Point
This is an immediate action key. It will immediately delete the currently-selected point, whether or not
that point is being edited, and select Navigate. The point following the currently-selected point (or the
point preceding if there is none) is selected.
Copy from Limit
Copies an existing limit into the current limit, including all secondary parameters (Description,
Associated Trace, Type, Margin, Interpolation, Relative to CF/RL).
Build from Trace
Builds a limit using an existing trace. This command will overwrite all data in the limit. Since a straight
copy would typically have hundreds or thousands of segments, the data is approximated to better
represent a limit line; small excursions whose width is less than 10 trace buckets will sometimes not be
captured. Secondary parameters which are not associated with traces (Description, Associated Trace,
Key Path Meas Setup, Limits, Edit
Notes There is no value readback on the key
Min –1000 dBm
Max 1000 dBm
Initial S/W Revision A.02.00
Key Path
Meas Setup, Limits, Edit
Initial S/W Revision A.02.00
Key Path
Meas Setup, Limits, Edit
Initial S/W Revision A.02.00
Remote Command: :CALCulate:LLINe[1]|2|3|4|5|6:COPY
LLINE1|LLINE2|LLINE3|LLINE4|LLINE5|LLINE6
Example: :CALC:LLINE2:COPY LLINE1 copies the data from line 1 into line 2.
Notes: Auto return to the Edit menu.
Initial S/W Revision: A.02.00