Filter
Top Products
876
AMPTD Y Scale
dBmV/m
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBμV/m. This is an antenna unit, and
this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of
the other Antenna Units are grayed out.
dBmA/m
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBμA/m. This is an antenna unit, and
this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of
the other Antenna Units are grayed out.
dBmA
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBμA. This is an antenna unit, and
this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of
the other Antenna Units are grayed out.
dBpT
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBpT. This is an antenna unit, and
this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of
the other Antenna Units are grayed out.
Key Path: AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example: UNIT:POW DBUVM
Dependencies: Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback: dBμV/m
Initial S/W Revision: A.02.00
Key Path:
AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example: UNIT:POW DBUAM
Dependencies: Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback: dBμA/m
Initial S/W Revision: A.02.00
Key Path:
AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example: UNIT:POW DBUAM
Dependencies: Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback: dBμA
Initial S/W Revision: A.11.00
Key Path:
AMPTD Y Scale, Y Axis Unit, Antenna Unit