Filter
Top Products
411
ACP Measurement
Meas Setup
Carrier Coupling
Couples carrier settings to carrier #1. The coupled parameters are Carrier Power Present, Carrier
Spacing, Measurement Noise Bandwidth, Method, and Filter Alpha.
Carrier Pwr Present
Configures the carriers for this measurement. It allows spaces to be inserted between carriers. Carriers
with the power present parameter set to Yes are carriers, and those with the power present parameter set
to No are spaces. Each carrier power present is set to Yes or No. The individual carriers can be set by
selecting the desired carrier on the carrier menu key using the up down arrows, the knob, or numeric
keypad, then toggling the carrier power present using the carrier power present menu key.
Max Number of available carriers
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path
Meas Setup, Carrier Setup, Configure Carriers
Mode WCDMA, C2K, WIMAX OFDMA, 1xEVDO, TD-SCDMA, LTE, LTETDD
Remote Command [:SENSe]:ACPower:CARRier[1]|2:LIST:COUPle OFF|ON|0|1,
OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1,
OFF|ON|0|1
[:SENSe]:ACPower:CARRier[1]|2:LIST:COUPle?
Example ACP:CARR:LIST:COUP OFF
ACP:CARR:LIST:COUP?
Notes Carrier sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Couplings When Couple is selected, the carrier settings are coupled to carrier #1.
Coupled parameters are Carrier Power Present, Carrier Spacing, Measurement
Noise Bandwidth, Method and Filter Alpha.
When a setting is changed, the couple is set to Man automatically.
Carrier #1 is always set to couple and cannot be changed.
Couple/Man selection on the Carrier key is not displayed when selected
carrier number is #1.
Preset ON
State Saved Saved in instrument state.
Range Couple|Man
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00