Filter
Top Products
1211
Source (Internal)
None
Sets no marker to be used for the ALC hold function, essentially turning the ALC hold function off.
Marker 1
Sets marker 1 to be used for the ALC hold function.
Marker 2
Sets marker 2 to be used for the ALC hold function.
Marker 3
Sets marker 3 to be used for the ALC hold function.
Remote Command: :SOURce:RADio:ARB:MDEStination:ALCHold NONE|M1|M2|M3|M4
:SOURce:RADio:ARB:MDEStination:ALCHold?
Example: SOUR:RAD:ARB:MDES:ALCH NONE
Dependencies: When a new waveform is selected for playback the settings contained within
the associated waveform header file are applied to the ARB. The ALC hold
setting is one of the values stored within the header file. If the newly selected
waveform file has an associated header file, the ALC hold setting is updated
with the value from the header file. The ALC hold setting will remain
unchanged if the newly selected waveform does not have an associated header
file.
Range: None | M1 | M2 | M3 | M4
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Marker Utilities, Marker Routing, ALC
Hold
Example: SOUR:RAD:ARB:MDES:PULS NONE
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Marker Utilities, Marker Routing, ALC
Hold
Example: SOUR:RAD:ARB:MDES:PULS M1
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Marker Utilities, Marker Routing, ALC
Hold
Example: SOUR:RAD:ARB:MDES:PULS M2
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Marker Utilities, Marker Routing, ALC
Hold