Filter
Top Products
232
System Functions
System
GREEN: The indicator is green when <90% of the memory limit is consumed. This means the
applications you have selected can all fit into the analyzer’s memory with room to spare. You will likely
be able to load one or more other applications without running out of memory.
Select All
Marks all applications in the selection list. This allows you to enable all applications licensed on the
instrument for pre-loading, or is a convenience for selecting all applications in one operation and then
letting you deselect individual applications.
Deselect All
Clears the marks from all applications in the selection list, except the Power On application. The Power
On application cannot be eliminated from the pre-load list.
Move Up
The application list is the order that applications appear in the Mode Menu. This key enables you to shift
the selected application up in the list, thus moving the selected application earlier in the Mode Menu.
Move Down
The application list is the order that applications appear in the Mode Menu. This key enables you to shift
the selected application down in the list, thus moving the selected application later in the Mode Menu.
Select/Deselect
Toggles the currently highlighted application in the list.
Save Changes and Exit
Applies the configuration of the applications list. The marked applications will be pre-loaded in memory
the next time the instrument application is started, and the order of the applications in the list will be the
Key Path: System, Power On, Configure Applications
Initial S/W Revision: A.02.00
Key Path:
System, Power On, Configure Applications
Initial S/W Revision: A.02.00
Key Path:
System, Power On, Configure Applications
Initial S/W Revision: A.02.00
Key Path:
System, Power On, Configure Applications
Initial S/W Revision: A.02.00
Key Path:
System, Power On, Configure Applications
Initial S/W Revision: A.02.00