Filter
Top Products
1393
View/Display
View/Display
This section describes the Display key, which is the key in the View/Display menu that is common to
multiple Modes and Measurements. See the Measurement descriptions for information on the View
functions of each measurement.
Display
The Display menu is common to most measurements, and is used for configuring items on the display.
Some
Display menu settings apply to all the measurements in a mode, and some only to the current
measurement. Those under the
System Display Settings key apply to all measurements in all modes.
Annotation
Turns on and off various parts of the display annotation. The annotation is divided up into four
categories:
1. Meas Bar: This is the measurement bar at the top of the screen. It does not include the settings panel
or the Active Function. Turning off the Meas Bar turns off the settings panel and the Active
Function. When the Meas Bar is off, the graticule area expands to fill the area formerly occupied by
the Meas Bar.
2. Screen Annotation: this is the annotation and annunciation around the graticule, including any
annotation on lines (such as the display line, the threshold line, etc.) This does NOT include the
marker number or the N dB result. When off, the graticule expands to fill the entire graticule area.
3. Trace annotation: these are the labels on the traces, showing their detector (or their math mode).
4. Active Function annotation: this is the active function display in the meas bar, and all of the active
function values displayed on softkeys.
See the figure below. Each type of annotation can be turned on and off individually.
Key Path: Display
Key Path: View/Display
Initial S/W Revision: Prior to A.02.00