Filter
Top Products
1094
Mode
Application Mode Catalog Query (Remote Command Only)
Returns a string containing a comma separated list of names of all the installed and licensed
measurement modes (applications). These names can only be used with the :INSTrument[:SELect]
command.
Application Identification (Remote Commands Only)
Each entry in the Mode Menu will have a Model Number and associated information: Version, and
Options.
LTE 102 LTE
LTE TDD 105 LTETDD
Remote Command: :INSTrument:NSELect <integer>
:INSTrument:NSELect?
Example: :INST:NSEL 1
Notes: The command must be sequential: i.e. continued parsing of commands cannot
proceed until the instrument select is complete and the resultant SCPI trees are
available.
Preset: Not affected by Preset. Set to default mode following Restore System
Defaults.
State Saved: Saved in instrument state
Initial S/W Revision: Prior to A.02.00
Remote Command: :INSTrument:CATalog?
Example: :INST:CAT?
Notes: Query returns a quoted string of the installed and licensed modes separated
with a comma. Example:
"BASIC,EDGEGSM,CDMA"
Backwards Compatibility Notes: VSA (E4406A) :INSTrument:CATalog? returned a list of installed
INSTrument:SELECT items as a comma separated list of string values:
"BASIC","GSM","EDGEGSM","CDMA","NADC","PDC","WCDMA","CD
MA2K","CDMA1XEV","IDEN","WIDEN","WLAN","SERVICE"
X-Series uses the ESA/PSA compatible query of a string contain comma
separated values:
"BASIC,CDMA,CDMA2K,WCDMA,CDMA1XEV,EDGEGSM,GSM,TDS
CDMA,DMODULATION,WLAN"
Initial S/W Revision: Prior to A.02.00
Mode Mode Number Mode Parameter